Medion LIFE MD 31107, Инструкция по эксплуатации

Страница: 125 / 166

40
FRE-
QUENCY
(only in
DVB-C
mode)
Set the frequency. The default setting is
AUTO
.
Only active if the option
NETWORK
SCAN
has been selected in search mode.
SYMBOL
RATE
(only in
DVB-C
mode)
Set the symbol rate.
SORTING
BY LCN
Logical Channel Numbering: Select the
setting
ON
if you want to order the chan-
nels based on a preset channel list (if
available from the channel supplier).
After you have made all the settings, press
O K
. The
channel search will then start.
If you have selected the source
SATELLITE
, the fol-
lowing setting options are available:
COUNTRY Select the desired country for the chan-
nel search.
SATELLITE Select the satellite via which the search
will be started.
SCAN
MODE
Set the search mode.
DEFAULT
: A search on the selected sa-
tellite will be carried out based on the
transponder list saved for this satellite.
This requires a little time.
NETWORK SCAN
: Activate/deactiva-
te the network search.
BLIND SCAN
: A complete search on
the selected satellite will be carried out.
This will also take into account new trans-
ponders that have not been added to
the list of transponders. Two searches are
carried out with the blind scan. The first
search identifies the transponders for the
satellite, while the second search locates
the channels. The blind search requires
the most time.