23
Using a supplied frame
You can use one of the frames supplied if you want to cover
the plastic edge of the device. They have a boring on the side.
You will be able to continue to use the remote because of this
boring. Proceed as follows to attach one of the supplied frames
to the device:
Place the frame on a level surface with the back facing up-
wards and the side boring to the right.
Place the device on the frame with back facing upwards.
CAUTION!
You will no longer be able to use the remote if
the frame is covering the infra-red sensor!
Make sure that the infra-red sensor is posi-
tioned to the left on the front of the device,
behind the oval boring on the frame.
Press the device down gently until the six retainers in the
frame lock audibly.
