background image

If the devices have been switched off and then switched back on again, the car radio 
will automatically search for connected devices. This takes about 10–15 seconds.

13.2. Telephone 

calls

 

Make sure your mobile phone is switched on and place it near the car radio.

Select numbers

You can enter the telephone number via your mobile phone as normal

Redialling last call number

The unit stores the last call number automatically. To access this, proceed as follows: 

 

Press the 

M O D E

 button on the front panel repeatedly to go into BT menu.

 

Press the 

 key  on the panel to dial out the last number which called before. 

CALLING

 appears in the display and in phone display the phone number

Accept calls, rejects calls, ending calls

The ring tone of your mobile phone will be transferred to the speaker when your 
phone rings. 

PHONE

 and the number appear in the display.

 

Press 

 to accept the telephone call.

 

Press 

 to reject the telephone call.

 

During a call press 

 to end the telephone call.

If the car radio is in standby mode when an incoming call is received, it will 
automatically switch on. Once the call is ended, the car radio returns to standby 
mode.

13.3. A2DP 

mode

Many mobile phones also have an audio playback function (MP3 player etc.). A2DP 
(“Advanced Audio Distribution Profile”) is the ability to play audio files from Bluetooth 
devices. Your car radio has this option.
If your mobile is registered on the car radio, you can transfer the audio files via the car 
radio.

 

Press the 

M O D E

 button on the front panel repeatedly to go into BT menu. Start 

the music playback on your telephone.

 

Press the 

1

II button to select 

BT AUDIO

 mode

 

You can now pause/resume playback with the 

1

II button.

 

Use the 

 or 

 buttons  to skip to the previous or next track. The track number 

is shown on the display.

 

Hold down the 

 or 

 buttons  for longer to fast forward or rewind

AFTER SALES SUPPORT

1300 884 987

www.medion.com.au

AUS

Bluetooth function

28

80005 DE for AUS ALDI Content RC3.indd   28

80005 DE for AUS ALDI Content RC3.indd   28

16.07.2015   13:56:10

16.07.2015   13:56:10

Содержание E65114



































Отзывы: