Medion Akoya P54016, Инструкция по эксплуатации

Страница: 32 / 142

Operating elements
11
Deutsch
English
Nederl
ands
Franç
a
is
Itali
a
no
Esp
a
ñol
Dansk
Operating elements
(Ill.: Front operating elements)
Ref. Button Description
1 You will start the OSD (On Screen Display) with this button. Press this button
again if you wish to leave the OSD.
+ Power block, when the OSD is not activated
+ OSD block, when the OSD is not activated
Hold the key combination until the bar siplayed has moved from left to right
completely, to activate/de-activate the block. A corresponding message will
appear on the screen.
2 Select a parameter and reduce its value with this button, when the OSD is
switched on.
If you are not in the OSD: Direct call-up of the Contrast/Brightness menu.
3 Select a parameter and increase its value with this button, when the OSD is
switched on.
If you are not in the OSD: Direct call-up of the Picture Mode menu.
4 Confirm the selection of the parameter to be changed with this button.
If you are not in the OSD: Direct call-up of the Input Select menu.
5 Operational display Shows the operational state. Please also refer to page 14.
6 You can switch the TFT monitor on or to the Standby mode with this button.