1
Connect monitor
2
Connect keyboard and mouse
Monitor (not supplied)
Keyboard
Mouse
Monitor connection
(HDMI, VGA or DVI-D)
R
N
O
M1
K
B
C2
D2
P2
P1
Quick Guide
Setting up components
Connecting peripherals
When setting up your PC lay the cables safely to prevent them from being trodden on or tripped over.
Position your PC and peripherals in such a way that the connections are easily accessible.
Note:
There should be no bootable disc in the optical
drive as this will prevent the operating system
from being loaded from the hard drive.
7. Follow the initial setup instructions once the
Windows welcome screen has appeared. Step-
by-step instructions will guide you through the
process to be followed.
Please read the detailed
installation,
connection and safety instructions in your
operating manual.
1. Connect the signal cable of your monitor
either
to the HDMI (
M1
), VGA (
P1
) or the
DVI-D (
P2
) connection of your PC. (Please
read the operating manual for your monitor.)
2
.
Connect the keyboard and the mouse to a free
USB port (
B
).
3. Connect the speakers to the green audio
socket (
C2
).
Antivirus software is installed on your PC. The software
will automatically be registered when the PC connects to
the internet. With the free registration you will receive free
updates for 30 days. Please also read the additional infor-
mation on antivirus software in the operating instructions.
Note:
Do not install any further antivirus software as this can affect the
performance of the PC.
Note:
The operating system and antivirus software are automatically
updated when the first online connection is made. These proces-
ses usually take a few minutes, during which time the operating
speed of the computer may be affected although this is only
noticeable on initial start-up.
4. Insert the mains cable into the mains power
socket (
N
) of your PC and then plug into a
socket. This must be near to the PC and easily
accessible.
5. Your PC mains adapter has a mains switch (
N
)
to provide the PC with power. Set the switch
to position
I
. (If you set it to
O
, the power
supply will be interrupted.)
6. Switch on the PC by briefly pressing the on/off
switch on the front. Your PC will now start and
run through various steps.
Connecting power supply
Start
Activating antivirus software
4
Connect mains cable
5
Switch on mains power
3
Connect speakers
6
Switch on monitor and PC
Approximate illustrations, optional features, subject to technical changes
MSN 2005 8667
Speakers
(not included)
Speaker
socket
B USB 2.0 Ports
C2 Audio output /
Speakers (front out)
D2 Microphone In (mic) / Speakers
(center/subwoofer out)*
K Gigabit LAN network
M1 HDMI connection
N Power supply
O Docking station for external harddisk
Medion HDDrive2Go super speed
P1 Monitor connection VGA
P2 Monitor connection DVI-D
R Audio input (line in) /
Speakers (rear line out)*
*
Connections with double assignments.
Configuration via software.
20058667_QSG_MD8325_DE-UK.indd 2
16.10.14 12:28
