Autoradio_41804_UK.FH11 Thu Oct 14 15:46:44 2004 Seite 8
Dashboard
Flaps
Screwdriver
Installation frame
ASSEMBLY
The car radio can be fitted in any standard ISO slot for car radios. If you vehicle has
no ISO slot, please consult a specialist workshop, dealer, or a specialist department
of a car equipment warehouse.
Insert the mounting frame in the ISO installation slot.
Bend the flaps in the mounting frame with a screwdriver so that it is fixed firmly
in place in the installation slot (see diagram).
Now connect the car radio's ISO block to the
vehicle's two ISO plugs.
Connect the vehicle antenna's cable
to the car radio antenna socket.
Push the car radio carefully into the slot until it fits securely.
While pushing the radio, take care to ensure that the cables are not damaged during the
process.
Insert the control panel as described in the next section.
Please use the car radio's ISO block for installation. These adapters can be obtained from
specialist workshops, dealers, or specialist departments of car equipment warehouses.
If the ISO block is separated from the radio the warranty will become NULL AND VOID!
INSERT THE CONTROL PANEL
Push the car radio forward into the slot until it fits securely.
Press von below and close the control panel,
so that you can see the display.
Control panel
Press the RESET BUTTON (15) using the
tip of a pen or another sharp object.
7
