English
11
DE
EN
FR
ES
DK
NL
Operating elements
1
2
3
4
5
6
(Ill.: Front operating elements)
Ref. Button
Description
You will start the OSD (On Screen Display) with this button. Press this button
again if you wish to leave the OSD.
+
Power block, when the OSD is not activated
+
OSD block, when the OSD is not activated
Hold the key combination until the bar siplayed has moved from left to right
completely, to activate/de-activate the block. A corresponding message will
appear on the screen.
Select a parameter and reduce its value with this button, when the OSD is
switched on.
If you are not in the OSD: Direct call-up of the
Contrast/Brightness
menu.
Select a parameter and increase its value with this button, when the OSD is
switched on.
If you are not in the OSD: Direct call-up of the
Contrast/Brightness
menu.
Confirm the selection of the parameter to be changed with this button.
If you are not in the OSD:
Automatic adjustment
You can switch the TFT monitor on or to the Standby mode with this button.
Operational display
Shows the operational state. Please also refer to page 14.
