mmHg
M
D
mmHg kP a
M
D
N o
12
11
13
1-2
cm
''
(0.4
-0.8
)
MEM
SYS
DIA
mmHg
mmHg
PUL
/min
STOP
ST ART
mmHg
M
D
Note: Refer to page 17 for detailed information on blood pressure.
mmHg
M
D
Unit Operation
Unit Operation
Applying the Arm Cuff
1. Firmly insert the air plug into the opening located on the left side of the
monitor unit.
2. With the sticky velcro section facing outwards, insert the end of the cuff
underneath the metal ring of the cuff.
3. Fasten the cuff about 1-2cm (0.4-0.8”) above the elbow joint. For best
results, apply the cuff to the bare arm. Keep it level with the heart while
testing.
Testing
1. Power On:
Press and hold “START/STOP” button until a beep sounds. The LCD screen
will appear for one second as the unit performs a quick diagnosis. A long
tone indicates the unit is ready for testing.
Unit Operation
Unit Operation
14
Note: The unit will not function if residual air from previous testing is
present in the cuff. The LCD will flash until the pressure is stabilized.
2. Pressurization:
Initial pressure is first pumped to 190mmHg. If the current user’s systolic
blood pressure is over 190mmHg, the unit will automatically re-inflate to
the proper level.
3. Testing:
After cuff inflation, air will slowly subside as indicated by the corresponding
cuff pressure value. A flashing will appear simultaneously on screen
signaling heart beat detection.
Note: Relax and do not move or speak during testing.
4. Result Display:
Three short beeps sound when the testing is complete. The screen will display
measurements for systolic and diastolic blood pressure and the pulse per
Power Off
Safety Precaution: If the arm cuff pressure becomes too extreme whilst
testing, simply press the “START/STOP” button to turn the unit off. The cuff
pressure will rapidly deflate once the unit is off.
minute. An indicator representing the current measurement will appear next
to the corresponding WHO Classification.
The “START/STOP” button can be pressed to turn the unit off in any mode. The
unit will switch itself off if it has not been operating in any mode for about 3
minutes.
Indicator
Irregular Heartbeat Indicator:
If the monitor detects an irregular heart rhythm twice or more during the
measuring process, the Irregular Heartbeat Symbol will appear on
screen together with the measurement results.
Irregular heartbeat rhythm is defined as rhythm that is either 25% slower
or faster than the average rhythm detected whilst measuring systolic
and diastolic blood pressure.
Consult your doctor if the Irregular Heartbeat Indicator appears.
5. Storing Test Results:
Test results are automatically stored by date within the previously
configured memory group. If the number of tests surpasses 60 memories
per group, the most recent test results will show first thus eliminating the
oldest readings.
