Onni - Standing frame instructions
7
Timoteos Oy
5.
Measuring and adjusting
5.1 User height
User height defines the size of
the product to be used:
60 - 95 cm : size 1
90 - 130 cm : size 2
120 - 155 cm : size 3
130 - 180 cm : size 4
5.2 Foot rests and hip
support
Measure the distance between
the foot and hip joint. Most of the
time, the hip joint is positioned in
the middle of the side support (in
line with the side support
adjustment screw).
Start with the hip support pad in
the lowest position and adjust the
foot rests downward. Then
continue with the hip support
upward if needed. This way the
body centre of mass will remain
close to the pivot point of the tilt.
5.3 Thoracic pad and side
supports
Measure the distance between
the foot and axilla (A) and adjust
the thoracic pad to the correct
height using the screw on the
frame side.
Adjust the side supports (C & B)
according to trunk width.
!
Adjust the foot
rest downward
before adjusting
the hip pad
upward to
maintain a good
balance for the
tilt function.
5.2
5.3
C
B
Multistand 2000 User Manual