background image

HT485-INS-LAB-RevB14 

4

 Made in China

SPECIFICATIONS

Maximum weight capacity

490 lb / 220 kg, using 50 lb / 20 kg counterpoise weight. See 

Counterpoise Weight Installation

Graduation

0.25 lb / 100 g

Height rod range

24 inch - 84 inch / 60 cm - 210 cm

Minimum value of height per division

0.25 inch / 5 mm

Platform size

14.76 inch x 10.83 inch / 375 mm x 275 mm

Overall dimensions (L x W x H)

20.87 inch x 10.83 inch x 58.46 inch / 530 mm x 275 mm x 1485 mm

LIMITED WARRANTY

SCOPE OF WARRANTY

Medicus Health

 warrants to the original purchaser only that it will replace or repair components, at 

our

 sole discretion, that are defective 

in material or workmanship under normal use and service. All warranties are conditioned upon the proper use of the products strictly in 

accordance with good commercial practice and applicable 

MH

 instructions and manuals, including proper use and maintenance. To the 

extent that a component is warranted by a third party, 

MH

 conveys all of its rights under that warranty to the original purchaser, to the 

extent permitted. This limited warranty shall only apply to defects that are reported to GF’s customer service team within the applicable 

warranty period and which, upon examination by

 MH

or its authorized representative, prove to be a warranty item. This limited 

warranty is not transferable. Within the guidelines set forth in this document, this product is warranted for two years. The applicable 

warranty period shall commence from date of shipment to the original customer, unless there is an expiration date on the component in 

which case the warranty shall expire on the earlier of warranty period or the expiration date.

OBTAINING WARRANTY SERVICE

A Customer Service Representative must authorize warranty service. Please contact the Customer Service department by calling 

877-514-1140

, or by e-mailing a request to 

sales

@

medicus-health

.com. Specific directions will be provided by

 

the Customer Service 

Representative. Failure to abide by the specific directions will result in denial of the warranty claim.

EXCLUSIONS

The warranty does not cover and GF shall not be liable for the following: 

1)

Defects, damage, or other conditions caused, in whole or in part, by misuse, abuse, negligence, alteration, accident, freight damage,

 

tampering or failure to seek and obtain repair or replacement in a timely manner;

2)

Products which are not installed, used, or properly cleaned and maintained as required in the official manual for the applicable

 

product;

3)

Products considered to be of a non-durable nature including, but not limited to: casters, filters, fuses, gaskets, lubricants, and 

charts;

4)

Accessories or parts not provided by 

MH

;

5)

Charges by anyone for adjustments, repairs, replacement parts, installation or other work performed upon or in connection with

 

such products which are not expressly authorized in writing, in advance, by GF;

6)

Any labor or shipping charges incurred in the replacement part installation or repair;

7)

Costs and expenses of regular maintenance and cleaning; and

8)

Representations and warranties made by any person or entity other than GF.

ENTIRE WARRANTY, EXCLUSIVE REMEDY AND CONSEQUENTIAL DAMAGES DISCLAIMER

THIS WARRANTY IS GF’S ONLY WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. GF MAKES NO IMPLIED 

WARRANTIES OF ANY KIND INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 

IF ANY MODEL OR SAMPLE WAS SHOWN TO THE CUSTOMER, SUCH MODEL OR SAMPLE WAS USED MERELY TO ILLUSTRATE THE 

GENERAL TYPE AND QUALITY OF THE PRODUCT AND NOT TO REPRESENT THAT THE PRODUCT WOULD NECESSARILY CONFORM 

TO THE MODEL OR SAMPLE IN ALL RESPECTS. THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE 

PARTS. GF SHALL NOT BE LIABLE FOR AND HEREBY DISCLAIMS ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY OR 

CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO: DAMAGES FOR LOSS OF PROFITS OR INCOME, LOSS OF USE, 

DOWNTIME, COVER, OR EMPLOYEE OR INDEPENDENT CONTRACTOR WAGES, PAYMENTS AND BENEFITS.

The warranties contained herein contain all the representations and warranties with respect to the subject matter of this document, 

and supersede all prior negotiations, agreements and understandings with respect thereto. The recipient of this document hereby 

acknowledges and represents that it has not relied on any representation, assertion, guarantee, warranty, collateral contract or other 

assurance, except those set out in this document.

For additional information on this product or this warranty, please contact a Customer Service Representative.

NOTES:

1)

Additional terms and conditions may apply.

2)

Freight claims must be notated on the Bill of Lading and must be made with immediacy. The ICC regulations govern specific

 

requirements for freight claims. Failure to abide by those regulations may result in a denial of the freight claim. 

MH

 will assist you 

in

 

filing the freight claim.

3)

Claims for any short shipment must be made within thirty (30) days of the invoice date.

Содержание 2956M5

Страница 1: ...roduct INTENDED USE The intended use of the Physician Mechanical Beam Scale shown in Fig 1 is the measurement of body weight and height It is ideal for use in health clinics and doctor practices The designation of this product meets the OIML international Recommendation R76 UNPACKING Unless the scale is to be used immediately retain box and packaging materials for storage until use is required 1 C...

Страница 2: ... on the floor Height Rod Installation 1 Install the height rod back side slots over the two pillar front side bolts and slide the height rod down until securely attached to the pillar as shown in Fig 6 and 7 2 Use the included wrench to tighten the two hex head bolts as shown in Fig 8 Do not overtighten Wheel Installation 1 Align wheel bracket with scale platform so that the wheel bracket side wit...

Страница 3: ...tles in the eye loop area center 3 If the scale does not settle in the center of the eye loop area it is not balancing properly adjust the small zero balance weight Use a screwdriver to turn the zero adjusting screw this will cause the zero balance weight to move accordingly Info When the scale pointer settles in the center of the eye loop area it is properly balanced TROUBLESHOOTING Problem Solut...

Страница 4: ...leaned and maintained as required in the official manual for the applicable product 3 Products considered to be of a non durable nature including but not limited to casters filters fuses gaskets lubricants and charts 4 Accessories or parts not provided by MH 5 Charges by anyone for adjustments repairs replacement parts installation or other work performed upon or in connection with such products w...

Отзывы: