1
Push it to turn the wraps ON/OFF. ON/OFF. When you
turn it ON, the Display
will show
ON
. It means that
the controller is ON and ready to choose the program.
If controller display shows
--
t means that the Power is
connected but the Button has not been activated and
no functions can be operated. Press power button
again with some effort so that display
shows
ON
4
5
7
ON when mat is heating, OFF
when set temperature is reached
Use to increase or decrease heat 30~70 °C
(86~158 °F). The dial range is marked,
indicating the desired temperature in °F
Switches into Temperature Mode when the
Temperature Dial
is rotated. Display shows the
current Celsius temperature (30–70 °C), flashes
to the set temperature when dial is rotated, then
back again.
If the temperature is more then 122 °F (50 °C)
for longer than 3.5 hours,
Auto-Protection
Feature
will decrease it to safe 115 °F (45 °C)
level and display will show
[ ]
.
In Timer mode Display shows one of 5 heatings
time settings
1H, 4H, 8H, 0H
or
-H
chosen by
Timer Control Button
. When the heating
program is over the temperature display will
show
--
,
OF
or
ON
indicating that Power is ON
but the time set has expired. Add time to
resume heating or push the Power Button
to
turn-off the Controller.
In PHOTON Program mode Display shows one of
three PHOTON program settings.
1P
= PHOTON
ON 30 minutes.
2P
= PHOTON runs 8 program
cycle (One cycle = PHOTON ON 30 minutes OFF
30 minutes).
-P
(PHOTON OFF for FAR INFRARED
function only).
Display may also show
OF
, flickering or static
--
if the Power Button
is not pressed or if
connection between the controller and the mat
is lost. Press Power Button
to turn ON all
other functions of controller or reconnect
controller to the mat tightly to resume
Choose one of three PHOTON
program settings.
1P
turns ON Red
Light LEDs for 30 minutes.
2P
runs
8 cycles program (One cycle =
PHOTON ON 30 minutes, OFF 30
minutes).
-P
(PHOTON OFF for FAR
INFRARED function only). Please,
check Controller user guide for
details
Heating Operation indicator
4
Power ON/OFF Toggle Button
1
Temperature, Timer, Frequency
and Program Display
5
PHOTON Program Button
7
Adjust Temperature Dial
6
6
CONTROLLER H-60P
• It is the responsibility of the owner to read all user guides and ensure
that all users of the mat and controller are adeqately informed of all
precautions.
• To reduce the risk of fire or electric shock, do not expose this controller
to rain or moisture, do not touch any electrical parts with wet hands, do
not use in the bathroom or wet sauna.
• Your mat has double safety advanced EMF free heating system with
emergency bimetal switches physically cutting off the electrical wires if
the mat’s main thermostat safety system fails and it overheats to 180 °F
(75 °C). Anyhow stop using and immediately unplug the mat from its
power source (wall outlet) if you experience strange conditions such as
smell, smoke, shocks and/or fire. Contact
for
assistance.
• Do not position controller on the mat or near heat sources or magnetic
fields such as radiators, heat registers, stoves, TV sets, or magnetized
objects. Do not immerse the mat or the controller in water. Do not dry
clean. Do not use any detergents, solvents or flammable agents to clean
the mat or the controller. Clean both with a damp cloth. Clean the
controller only when the power is off and it is unplugged from the AC
outlet.
• Never pull your mat by the electrical supply cord or controller. Protect
controller from falling down or impacts. Do not put heavy objects on the
mat or on the controller. Store the mat and controller separately from
each other to avoid accidental damage.
• To extend the life of your controller, use a surge protector. Power spike
is the main reason why a mat would ever malfunction, an electrical surge
kills the controller and renders the mat unusable until a new controller is
purchased.
• Do not open or modify controller without manufacturer’s approval. Do
not use the controller if it is malfunctioning, if the mat is damaged or if
connection between the mat and controller is not tight.
SAFETY INSTRUCTIONS
2
Lights up when Power is ON
Power indicator
2
If the controller shows errors or is dead, try to
replace the fuse (H-series) or contact us for a
replacement. If the controller shows the current
temperature yet the mat does not heat up when it
should, the mat sensors, bimetal switches or
heating elements could have failed. Please,
contact us [email protected] for a
replacement.
8
9
Select one of 4 options shown on the Display
:
1H, 4H, 8H, 0H
for 1, 4, 8, 12 hours
heating session with auto shut-off when
time expires or you can choose
-H
(NO
HEATING MODE) for only PHOTON function
without heating
Timer Control Toggle Button
3
3
Lights up when Red Light is auto
cycled by program. OFF when the
whole Program is over
PHOTON PROGRAM CYCLE
Indicator
9
Lights up when the Red Light
LEDs are ON, OFF when
PHOTON function stops
PHOTON ON Indicator
8
