First you should tightly connect controller to the belt connector and
only after this plug-in controller into the power outlet. Then turn ON
controller with toggle switch.
The belt controller has three time settings 3 hours, 6 hours or 12
hours. You should choose one of them first to activate other functions.
Usually when you turn ON controller one of time setting is already
chosen. Press timer button to adjust it.
Controller also has a temperature dial to completely adjust the heat
in 1°C increments from 86°F to 158°F, displayed in Celsius from 30°C
to 70°C. Sometimes we call the different temperatures “levels”.
Level 1 is 86°F-98°F or 30°C-36°C (used for Negative Ions, all night
sleep low heat mode)
Level 2 is 98°F-110°F or 36°C-43°C (Low mode, regenerative sleep,
boosts energy and immunity*)
Level 3 is 110°F-120°F or 43°C-49°C (Low medium mode, relaxation,
immunity)
Level 4 is 120°F-133°F or 49°C-56°C (Medium mode, releases stress,
elevates mood, enhances vitality*)
Level 5 is 133°F-145°F or 56°C-63°C (Medium High mode, temporary
pain relief*)
Level 6 is 145°F-158°F or 63°C-70°C (High mode, cleansing and
detoxification*)
Level 7 is 158°F or 70°C (Highest mode, hyperthermia)
The temperatures above reflect the temperature of the inner heating
elements, not the surface of the belt, which can be 10-20°F lower (or
even lower than this) if the belt is not covered with a thick blanket.
Usually, if the ambient temperature is around 70°F, it takes between a
half an hour to hour for the belt to reach the maximum level (158°F, or
70°C) if covered it with a thick blanket.
If you feel that 6/12 hours is too much, an external timer can be
used. Some heavy duty ones with a built-in surge protector may be a
good choice for double protection.
2
THANK YOU
2
UNBOXING
3
CONTROLLERS
3
ADDITIONAL INFORMATION
4
SAFETY INSTRUCTIONS
5
CONTRAINDICATIONS
6
TIPS: BEFORE YOU START
6
TIPS: USING YOUR MAT
7
TIPS: USE WITH CAUTION
8
TIPS: TROUBLESHOOTING
9
TIPS: TAKING CARE OF YOUR MAT
10
MAINTENANCE AND CLEANING
10
WARRANTY
10
DISCLAIMER
THANK YOU FOR PURCHASING
MEDICRYSTAL
®
BELT AND CHOOSING US!
MediCrystal LLC is a small family-owned company dedicated to
customer satisfaction and to providing the highest quality health and
beauty products from natural amethyst, agate, tourmaline and jade at
the best possible prices.
We have personally experienced great healing benefits from the
MediCrystal® and ThermoGem® products and have decided to make
them available to our customers for an affordable cost.
We were so impressed by how the functionality of our ьфеы belts
compared to other, much more expensive brands that we decided to
launch a business focused on creating these amazing products.
Our purpose is to let other people unveil the secret of this reviving
experience at a substantial savings from the competition. We think not
just the wealthy, but everyone interested in holistic health, naturopathic
and alternative medicine should be able to use the healing power of
these gems and crystals.
We hope you experience as many positive results as we have, now
that you have your own MediCrystal® belt!
UNBOXING
THE BELT SET INCLUDES:
When you receive your belt, please take a moment to verify that it
was not damaged in transit. Carefully unpack the box and check if
everything is included and in due condition. If you discover that
anything was not included into the set, or there is any other reason
that you wouldn’t rate this as a 5-star experience, please, contact us
right away at
, so that we can resolve the
issue as fast as possible.
In addition to hot stone therapy, and deep FIR heat, MediCrystal®
Classic Amethyst Belt naturally generates negative ions through special
layers upon heat distortion when the belt is ON or using your own body
heat when the belt is OFF.
It is a great reason to use the belt regularly to walk, sleep, relax and
reenergize even without heating.
Belt straps with
Velcro fasteners
Controller L-40N
with terminal
and plug wires
Detachable heating
pad infused with
amethysts
Bag for storage and
carrying the belt
MediCrystal®
catalog and this
User Guide
Controller L-40N for Classic mats, pads and belts:
1
Power ON/OFF Switch Button – Push it to turn mat ON/OFF. Controller
Temperature display
2
will show “OF” until you activate the TIMER
3
.
2
Temperature Display – shows the current temperature, flashes to the
set temperature, then back again.
3
Timer Control Toggle Button – Chose 3, 6 or 12 hour heating session
with auto shut-of f when time expires. Timer should be activated first to
start heating.
4
Timer ON indicators – Light ON when Timer is used, shows the
number of hours the mat is set to function.
5
Adjust Temperature Dial – Use to increase or decrease heat
30°C~70°C (86°F~158°F).
1
2
3
4
5
CONTENTS
CONTROLLERS
All products, controllers, specifications and data as well as a set of items packaged in a box are subject to change without notice to improve reliability, function or design of the devices.
Please, check for the most updated products details at
MediCrystal.com
web site.
White waterproof
protector with 4-corners
straps
ADDITIONAL INFO
1. MediCrystal® amethyst belt is great for the lumbar, waist, lower
back or abdomen. It consists of belt strap with Velcro fasteners
and our smallest multilayer MediCrystal® amethyst pad attached
on the strap. The size of the
standard Belt heating pad is 8”x18”
(20x45 cm)
and it contains 1.5 pounds of crushed natural
amethyst.
XL Belt pad is 8”x21” (20x52 cm)
and it is filled with
almost 2 pounds of amethyst.
2. Belt straps with Velcro fasteners are
55” (140 cm) long for
standard Belt to fit waists up to 50”
. The strap of
XL Belt is 63”
(160 cm) long and it is OK for waist up to 58”
. If you are slim
better to choose the standard strap.
3. Your belt set should include, free of charge, a
Thick High
Absorption Waterproof Quilted Multilayer Protector with
4-cornered elastic straps
to fix it on the belt. The cover is
breathable and permeable for FIR rays and ions. It is great for
absorbing sweat and for keeping the contact surfaces between
the body and the belt dry.
This protector is machine washable
on gentle or hand wash cycle. Air drying is recommended
.
If you do not have a cover or it is warn, you may use a towel
instead.
4. The
top of the belt, with the MediCrystal Logo on it, is not a
heated area
but this and other non-heated areas of the belt still
have anion layers to generate negative ions.
5. MediCrystal® belts have a multilayer system construction with up
to 15 different layers. The
special layers (with anion generating
fibers) are added so that the belts generate negative ions
when
they are turned on and functioning. Controllers do not have the
option to activate negative ion generation from the inner belt
layers because the ions generation starts automatically when the
belt is heating up, due to the piezoelectric and pyroelectric effects
caused by the distorted crystallographic structure of the belt’s
anion generating layers and natural amethyst crystals. Negative ion
generation will decrease when the belt cools down.
The number
of ions goes up when you carry even the non-powered belt as
gemstones and negative ion generating layers start to use your
natural body heat to produce anions
.
6.
All MediCrystal® belts come with EMF-free (less than 2 mG
by specs and less than 0.2 mG by measurements), new-
generation advanced heating systems
. Anyhow if you are EMF
oversensitive, please be aware that some parts of all electrical
devices including all brands of FIR belts may emit relatively higher
EMF levels. These parts are plugs, overheat protection bimetal
switches, connection terminal and controller which on full power
can emit up to 4-8mG. Though these are still safe levels but for
sleeping, it is better to put the controller in some distance from
your head. Really the electric heating system works only during
10-20% of belt session time as it stops when the belt reaches
®
®
USER GUIDE
2
www.MediCrystal.com
3
Содержание CLASSIC AMETHYST BELTS
Страница 1: ......
