6
www.saniflowcorp.com
Mounting
1
INSTALLATION
Dismantling for installation
• The dryer is supplied with a pressure-mounted cover, and is not screwed down.
• The 4 attachment screws are provided in the bag with the plugs and lag bolts.
• Remove the cover vertically from the machine supporting base, taking care to avoid:
- Damaging the internal components.
- Damaging the cover. We recommend resting it on a flat surface with the visible part upwards, or on
top of a cloth.
• Mount the machine along the rear channels.
• Insert the electric ducting through the hole next to the terminal strip.
• Use the drill template provided to fix the dryer to the wall.
• Drill 4 holes with a diameter of 5/16” (8 mm), and take care to clean all traces of dust from the holes.
• Screw down the base firmly to the wall using a flat ended screwdriver of 1/4" (6÷7 mm).
• Connect the electric ducting to the terminal strip. Screw down the 3 locking screws firmly.
Hole for the insertion of the electric ducting.
CAUTION: do not damage the ir sensors in automatic models
