Medicare Prolevo FootSafe Скачать руководство пользователя страница 6

prolevo

Designed to be better

Cleaning Instructions

Cleaning and Disinfection Guidelines

Prolevo products are manufactured from polyurethane and should be cleaned in accordance with the user’s 

protocol for the cleaning of mattress covers. There are some precautions which are detailed below.

Where a policy does not exist for cleaning, Prolevo recommend the following for both the polyurethane and 

dartex covered products:-

Cleaning

•  Weekly cleaning of the product with soap/ detergent and water, rinsing with clean water and drying 

thoroughly.

• 

The pump used to inflate the product can also be cleaned in the same way, with soap /detergent, and then 

allowed to dry

NB - Depending on patient and continence status, more frequent cleaning or disinfection may be required

Disinfection

•  Where there is visible contamination (e.g.faeces/blood/urine), this should be removed from the product using 

soap I detergent and water, followed by rinsing with warm water. Following this, a disinfectant solution I wipe 

should be used which provides between 1,000 and 10,000 ppm available chlorine (this will depend on local 

protocol), followed by a clean water rinse and thorough drying of the product.

Precautions

The following points should be considered when cleaning Prolevo products

•  Abrasives and scourers should not be used

•  Phenol- based disinfectants should not be used

•  The product must be dry before use

•  Frequent cleaning with a concentrated disinfectant solution will reduce the life of the cover

• 

Where new disinfectants are introduced, clarification will be needed to confirm that they are suitable for 

polyurethane or dartex surfaces

Protective equipment should be worn when using disinfectant solutions, as per local protocol

Further information on the care /cleaning of Prolevo equipment can be found at:-

www.medicare-innovations.com

HEEL PROTECTION RANGE

Medicare Innovations Ltd, Springwood House, Foxwood Way, Foxwood Industrial Estate

Chesterfield S41 9RN, UK. 

Tel: +44 (0) 1246 268456

Fax:+44 (0) 1246 268648 

Email enquiries: [email protected] 

Web: www.medicare-innovations.com

Medicare

Innovations

Содержание Prolevo FootSafe











Отзывы: