STORAGE & MAINTENANCE
SURFACE CLEANING
Before cleaning, switch off the power and unplug.
Use a damp cloth with preferred cleaning product on the rubber pedal and
covers. Wipe away any cleaning product residue.
Do not clean with an abrasive product or detergent as it may
cause corrosion. Do not splash water to avoid short circuiting the
product.**
CLEANING THE CONTROLLER
Use only a dry cloth to avoid malfunction.
STORAGE AND MAINTENANCE
Ensure the power is off and the product in unplugged.
Clean any dust or debris.
Do not store in high humidity or extreme temperatures.
Use a dust cover if not in use over long periods of time.
COMMON PROBLEMS & SOLUTIONS
S/N
Problems
Causes
Solutions
1
The product can
not be started
The plug is not in place
Insert the plug
The power switch is off
Turn switch on, the indicator
The fuse is burnt
Replace with a new fuse of
the same mode!
2
Sound like Phew or Da-da
is heard during working
Normal sound generated
by the motor or from
the abrasion between
mechanical units
No additional treatment
is required
3
Operate the controller,
but the product no action
The electricity of batteries is
worn out
Replace batteries
The controller is too far
away from the product
The effective distance of
infrared signal is 2.5M
4
Sudden stop
Default working time is up
Restart it after
10 minutes interval
5
Can not operation
Too many commands sent
to the product en the can
not be responded in time
Power off and then restart
8
9
