8
9
If the eyebrow area is covered with hair, sweat or dirt, please clean
the area beforehand to improve the reading accuracy.
Always check if the lens is clean.
Always make sure the user and the thermometer will have been in
the same room prior to the measurement.
Take room/object temperature
Make sure the thermometer is powered off. Press
the Mem button for 3 seconds. The thermometer will
turn on and switch to room/object temperature mode.
Press the measure button to measure room/object.
Keep the thermometer about 1-3cm away from the
object. Press the Measure button, the thermometer
will beep once it has completed the measurement and
it will display the temperature on the display screen.
After a measurement
Once the reading has been completed, remove the thermometer
away from the forehead and observe temperature.
After each measurement, you can enter the recall mode and query
earlier temperature readings.
Do not hold the thermometer for a long time, because it is sensitive
to the ambient temperature.
After each measurement, clean the temperature probe with a soft
cloth, and put the thermometer in a dry and well-ventilated place.
You should wait at least 10 seconds between each measurement.
It is dangerous to make a self-diagnosis or self-treatment based on
the obtained measurement results. For such purposes, please consult
a doctor.
