20
for work with the DLNA
controller (DMC) to be able to
be found.
If the controller is connect
with MediaWalker 948 by
WiFi directly, you need to
choose “LAN” mode.
If your controller connect the
MediaWalker 948 through a
router/AP, which means both
the mobile phone (Controller)
and MediaWalker 498 connect on the same
router/AP, you need to choose the “WAN”
mode.
WiFi Configuration Section
The Default IP of MediaWalker 948 is
192.168.192.1
You can find the default SSID
mw948X_XXXXXX and WPA password in the
WiFi Configuration section. The default WiFi
WPA password is “12345678”
The default WiFi channel region is China and
the Auto Channel Selection is enable
All of these parameter can be changed.
Internet Configuration Section
Default WAN Type setting
using Ethernet to connect
Internet and using DHCP to
get WAN IP.
If you are using the Ethernet
to connect the Modem (ADSL)
directly, you should change to
use PPPoE to dial out.
You will need the PPPoE
Username and PPPoE
Password from your ISP provider.
