MediaTek LinkIt™ Smart 7688 Developer's Guide
© 2015, 2016 MediaTek Inc.
Page 41
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
3)
A Security Alert window will pop up as shown in Figure 20 below, this happens when you
use PuTTY for the first time, or after upgrading firmware or boot loader, or use a different
board. Click
Yes.
Figure 20 PuTTY Security Warning
4)
In the PuTTY terminal window that opens, log in with username
root
and enter the
password you set previously in the Web UI, after log in you should see a screen similar to
Figure 21.
Figure 21 System Console
•
For Mac:
Open Terminal. In the Terminal, type
at the command line, hit
return and you’ll be prompted to enter the root password. Enter the password you set
previously in the Web UI.
