MediaTek LinkIt™ Smart 7688 Duo Get Started Guide
© 2015, 2016 MediaTek Inc.
Page 12 of 27
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly
prohibited.
Figure 7 Selecting firmware file and start upgrade
5)
The firmware uploads to your board. Please make sure the board stays connected to its
power source until the firmware upgrade is completed. Notice the Wi-Fi LED blinks for
about 3 minutes (firmware upgrading), then the board will restart and the LED lights on for
about 30 seconds (rebooting). Finally, the board enters AP mode and is ready to be
connected.
6)
Find the LinkIt_Smart_7688_XXXXXX AP and connect the board through Wi-Fi. Notice the
Wi-Fi LED blinks 3 times per second after the board is connected to a client device. Now,
reload the
mylinkit.local
webpage, set a new password and sign in. The new firmware
version details will be displayed under Software Information, as shown Figure 8.
Figure 8 Firmware version
You now have the latest firmware on your LinkIt Smart 7688 development board.
Next: Access the LinkIt Smart 7688 Duo system console using SSH.
