Overview
Front
Panel
Rear Panel
1
2
3
4
5
6
7
2.
HDD 1
/
HDD 2 Status
Link
Access
Error
Rebuild
Blue
Purple
Red
(
Steady
)
Red
(
Blinking
)
1.
Power On
/
Power Off
Power on Blue
Confirmation
Button(CFM BTN)
6.
Connect with PC
/
Mac
USB port
7.
4.
DC
/
IN
Main Power Socket
3.
Power Button
Press to Power ON or Power OFF the device
5.
RAID Mode Selection
Single
JBOD
Button
1 OFF
2 OFF
1 OFF
2 ON
RAID 1
RAID 0
1 ON
2 OFF
1 ON
2 ON
Cautions
Before using RAID enclosure
1. Changing RAID mode may cause data lost, backup
your data before making changes.
2. When both HDD are installed at the same time in any
RAID mode, all data will be formatted.
3. When using “RAID function”, HDD of the same capacity,
model name and brand is strongly recommended.
4. Check for visible damage on unit, accessories and cables
before using the device.
HDD format recommended
Windows 7 NTFS or exFAT
Mac OS X HFS+ (Mac OS Extended)
Both Windows and Macintosh OS FAT32 or exFAT
Notes
•
USB port of your PC must support power-off function so that
the device would go to sleep mode. Setting up motherboard's
(power management) in S3 is strongly recommended please
refer to user guide of motherboard BIOS setting.
•
For the hard drive compatibility list, please visit our website
for detail information.
•
Visit our website for more details at
http://www.usbex.com/r52x-01
•
We reserves the right to modify or revise the content at
anytime without prior notice.
Warning
•
Follow all instructions.
•
Do not place this device near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings.
•
Install in accordance with the manufacturer’s instructions.
•
Do not place near any heat sources such as radiators, heat
registers, stoves, or the devices (including amplifiers) that
produce heat.
•
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the devices.
•
Power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon them
or against them.
•
Only use attachments/accessories specified by the manufacturer.
•
Unplug this during lightning storms or when unused for long
periods of time.
•
Refer all servicing to qualified service personnel. Servicing is
required when the devices has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the devices, the devices has
been exposed to rain or moisture, does not operate normally,
or has been dropped.
•
Carefully read and follow the Quick Install Guide and User Manual.
•
Do not drop or shake the device.
•
Do not move the device when it is powered on.
•
Do not overload wall outlets.
