11
4 Juice will begin to flow out of the spout and
into the
Juice Pitcher, while the pulp will be
separated and stored in the
Pulp Basin.
5 When the Pulp Basin is completely full, it must
be emptied before you continue juicing. See
disassembly instructions.
6 Always be sure to turn the Dual-Speed
Control Dial to the "OFF" position and wait for
the
Sieve to stop spinning before removing the
Juice Pitcher from under the spout. Unplug the
unit after each use.
7 Remove the Juice Pitcher from under the
spout. You may close the
Juice Pitcher Lid and
store juice in the
Juice Pitcher if desired.
NOTE: To do this, you’ll fi rst need to tip the
Juice Pitcher forward at a slight angle, so that
the lid’s large hole has some separation from
the spout, then you can slide out the pitcher.
This is the reverse of what you did during
assembly.
M28292_M29947_NBJXX100_Juicer_Manual_EN_20210511_CP.indd 11
M28292_M29947_NBJXX100_Juicer_Manual_EN_20210511_CP.indd 11
11.05.21 14:06
11.05.21 14:06
