MediaScreen SL Mobile LED 130, Инструкция по эксплуатации

Страница: 4 / 19

MediaScreen GmbH SL Mobile LED 130
2
© MediaScreen GmbH
2. Safety Precautions
These safety precautions must be observed minutely!
Inappropriate operation of the system may cause material damage,
possibly causing harm to the operator and bystanders!
• Carefully read the operating instructions and safety precautions before first set-up.
• Keep the operating instructions for later reference.
• Make sure the local power supply meets the requirements of the ScreenLifter (check type
label) before operating the system!
• Manipulation or replacement of any system components may only be carried out by quali -
fied technical personnel approved by the manufacturer or its distributors.
• In case of malfunctions of the ScreenLifter (emission of fumes, unusual noise, etc.) shut off all
system components and disconnect all power connections. A moderate smell of oil during
lifting or lowering of the screen is caused by warming of the lubricants applied to the me -
chanical parts of the lifting mechanism, and is not a sign of malfunction.
• Any modification of individual system components, or the ScreenLifter as a whole, is strictly
prohibited.
• The ScreenLifter may not be operated in a potentially explosive atmosphere.
• Do not operate the ScreenLifter outdoors. The ScreenLifter may be operated in a dry envi -
ronment only.
• The maximum weight of the ScreenLifter system (ScreenLifter plus transport case) including
a display is approx. 650 kg / 1433 lb* . When setting up the ScreenLifter, consider the load-
carrying capacity and condition of the surface, particularly of stages or other non-perma-
nent constructions.
• Only set up the ScreenLifter on a flat and level surface!
• When moving the screen up, down or rotating, it must be ensured that no objects, cables or
body parts are pinched in.
• Different types of display require different corresponding adapter frames. Do not mount a
display if you are not in possession of the dedicated adapter frame.
• When opening the transport case, never open the clasps on both lids at the same time. Do -
ing so may cause one lid to fall while lifting off the other.
• The removed case lids must be secured against tipping over. It is best to place them next to
each other on the floor, and to close the four clasps that connect the two lids.
• Check all bolted connections before operating the ScreenLifter.
• If you detect parts bent or otherwise damaged, the ScreenLifter must not be operated any
longer.
• Never try to carry out repairs of the ScreenLifter! The ScreenLifter may only be serviced by
the manufacturer, or trained technicians approved by the manufacturer or its distributors.
• The maximum duration of continuous operation of the lifting mechanism of 4 minutes ON
(see type label) must never be exceeded!
• If there is an increased requirement for stability (in case of trade fairs, places frequented by
the public, etc.) or if you want to move the lower edge of the display over 130cm, mount the
extensions provided in order to increase the base area of the Screenlifter.