Medias Mediatrix 1204, Справочное руководство

Страница: 81 / 390

Firmware Download Reference Manual (SIP Version)
Mediatrix 1204 55
4. If your HTTPserver requires authentication when downloading the firmware, set the following fields:
• The user name in the Firmware Download User Name field.
• The password in the Firmware Download Password field.
The Mediatrix 1204 supports basic and digest HTTP authentication, as described in RFC 2617.
5. If the firmware download server configuration source is Static :
• enter the firmware download primary server static IP address or domain name in the
Firmware Download Primary Server Host field.
• enter the firmware download primary server static IP port number in the Firmware
Download Primary Server Port field.
• enter the firmware download secondary server static IP address or domain name in the
Firmware Download Secondary Server Host field.
• enter the firmware download secondary server static IP port number in the Firmware
Download Secondary Server Port field.
The default port value complies to RFC 1340 on the well-known ports (assigned numbers). This
value applies to a TFTP server. It may be different for other servers. If you are using an HTTP server
to perform the firmware download, you must change the port value to 80.
6. Proceed to “Setting up the Firmware Download” on page 55 .
Setting up the Firmware Download
Configuration settings are not lost when upgrading the firmware to a newer version. However, configuration
settings may be lost if you upload an older firmware to the device. See
“Firmware Downgrade” on page 63 for
more details.
Extracting the Zip File
The zip file contains the firmware information required for the download.
Extract the contents of the zip file on the PC designated as the firmware download server. Be sure to use the
defined folder name. This creates a directory that contains the files required for the Mediatrix 1204 to properly
update its firmware.
The directory name must be the same as the name defined in the Firmware Location field or Firmware
Selection File Location field. See “Setting up the Configuration File Download” on page 43 for more details.
Mediatrix suggests that a folder, named identically to the firmware build, be available and used for the files
related to that build only. Each folder should include only one delivery to ensure accuracy.
This directory must be located under the root path as defined in the TFTP/HTTP server or the firmware
download will not proceed.
Setting up the Firmware Download Path
When performing a firmware download, you must configure the path, on the remote firmware download server,
of the directory where you extracted the files required for the download. This applies to both the manual or
automatic download procedure, using the HTTP or TFTP protocol.
The directory must be located under the root path, as defined in the TFTP or HTTP server, or the firmware
download will not proceed. See
“Before Downloading” on page 53 for more details.
The Mediatrix 1204 first downloads a file called “setup.inf”. This file contains the list of all the other files to
download, depending on the product. The “setup.inf” file and all the other files must be in the same directory.
If any of the files is missing, the procedure will not work properly.