Medias Mediatrix 1204, Справочное руководство

Страница: 58 / 390

Chapter 3 - Web Interface – Management Admin Page
32 Mediatrix 1204
5. Click Submit if you do not need to set other parameters.
The password resets back to the default value when:
• Resetting the password by using the httpServerResetToDefaultPwd variable (see
“Default User Name and Password” on page 32 for more details).
• Performing a factory reset (see “Factory Reset” on page 21 for more details).
Default User Name and Password
The default user name and password the web interface uses are stored in MIB variables you can modify.
X
To modify the default user name and password:
1. In the httpServerMIB , set the default user name for the web interface access authentication in the
httpServerUsername variable.
2. Set the default password for the web interface access authentication in the
httpServerDefaultPassword variable.
Both changes are immediate and take effect on all new web accesses.
X
To reset the web authentication password to the default value:
1. In the httpServerMIB , set the httpServerResetToDefaultPwd variable to reset .
The web password is reset to the default value specified by the httpServerDefaultAdminPassword
variable. The change is immediate and takes effect on all new web accesses.
Issue: Factory Reset does not Reset the Default Password Value
The following describes three cases in which the factory reset may not properly reset the HTTP server
password. Each case defines the password you must use to access the web interface.
Case #1
You do not modify the password via the Web page and you upgrade to a new software version with a new
default password in the profile.
Case #2
You modify the password via the web interface and you upgrade to a new software version with a new default
password in the profile.
Table 19: Case 1 Issue
Item Description
Wanted Behaviour The password to use is the default password in the new profile.
Current Behaviour The password to use is the default password in the previous version of the profile.
Workaround Once using the new software version, use the httpServerResetToDefaultPwd variable
as described in “Default User Name and Password” on page 32 .
Table 20: Case 2 Issue
Item Description
Wanted Behaviour The password to use is the password modified via the web interface in the older
software version.
Current Behaviour Same as the wanted behaviour.
Workaround None required.