5. Charging mobile devices I USB charging port
The LED desk lamp is equipped with an USB port for charging smart-
phones, tablets or other mobile devices. Before connecting a device
to the USB port, please check if the lamp’s USB output power is
sufficient to power the device you would like to connect.
Note: Please use the USB port only for charging appropriate devices and do not
connect any other USB device. The LED desk lamp cannot be operated by using the
USB port.
GB
Getting started and operation
For indoor
use only.
GB
Care and cleaning
• Disconnect the LED desk lamp before cleaning.
• Please clean the LED desk lamp only with a slightly damp and lint-free cloth.
• Do not use any aggressive cleaning agents.
• Please make sure that no water or any other liquid gets into the lamp.
GB
Technical data
GB
Warranty
MediaRange GmbH assumes no liability and provides no warranty for damage resulting from improper
installation/mounting, improper use of the product or from failure to observe the operating and/or safety
instructions.
7. Date, time and alarm function settings
To change or adjust the settings for date, time and alarm, push and
hold the "set"-button ( ) on the back until you hear an acoustic
signal.
Now you can set the date (month and day); time (h/min), 12h/24h
mode and an alarm, by using the arrow buttons on the back.
If the alarm function is activated, you can check the alarm time by
pushing the "set"-button ( ) once.
The alarm function can be activated and deactivated by pushing the
"arrow up"-button ( ). If the alarm function is activated, an alarm
clock icon will appear on the LCD display.
7
6. LCD display
The LED desk lamp has a LCD display which shows the time, date
and temperature and comes with an additional alarm function.
• Calendar: Month and day
• Time: Hour(s)/Minute(s); 12h or 24h mode
Alarm function: An alarm clock icon appears, when the alarm is
activated.
• Temperature indicator; degrees in Celsius or Fahrenheit
6
Temperature
indicator (°C or °F)
Time
(24h or 12h)
Calendar
(Month and day)
8. Insert or replace the button cell battery
Open the battery compartment with a phillips screwdriver, insert a
CR2032 button cell battery and close the battery compartment
again.
If you insert a battery, the time/date/alarm settings will be saved
when the LED desk lamp is unplugged or the power is disrupted.
8
For indoor use only. The lamp may only be operated
with the supplied power supply unit. The luminaire
contains built-in LED lamps. The lamps cannot be
changed in the luminaire. (EU) 874/2012
To improve products performance, the content of this
user manual may be revised without prior notice. All
brands and product names referenced in this user
manual are property of their respective owners and
reffered to for descriptive purposes only.
Dimensions (closed)
Ø 190mm, total height: 445mm
Total length swinging arm
360mm
Weight
± 1.120g
LED life time
Luminous flux
Illuminance
30.000h
> 450lm
> 1.500lx
Input power
100 - 240V ~; 50/60Hz; 0.65A
Power consumption
10W
Output power USB port
max. 5V - 0.5A
Built-in LEDs (not replaceable)
Lamps
Operating temperature
Power supply unit
-10°C to 40°C
100 - 240V ~; 12V 1.5A
