Top
PRI/T1/E1/J1 Card - Federal Communications Commission (FCC) Disclaimer
The PRI/T1 card complies with Part 68 of the FCC Rules. On the underside of this equipment is a label that contains, among other information, the FCC
Registration Number, Ringer Equivalence Number (REN) and USOC jack type for this equipment. You must, upon request, provide this information to your
telephone company. If your telephone equipment causes harm to the telephone network, the Telephone Company may discontinue your service
temporarily. If possible, they will notify you in advance, but if advance notice is not practical, you will be notified as soon as possible. You will be informed
of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could
affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone
service. If you experience trouble with this telephone equipment, please contact Media5 for information on how to obtain service or repairs. The telephone
company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not
malfunctioning. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs.
This device is equipped with an USOC RJ-48C connector.
Top
PRI/T1/E1/J1 Card - Innovation, Science and Economic Development Canada (ISED) Disclaimer
The PRI/T1 card meets the applicable Innovation, Science and Economic Development Canada technical specifications.
Top
BRI Standards Compliance and Disclaimers
BRI S/T- Card Supported Standards
Category Specification
Telecom
TBR3:1995 + A1:1997
Top
Stock Keeping Unit (SKU) Number for Model M
