background image

A - reserved
B - 4FXS Bypass card (contact media5 sales)
C - 2FXS Bypass card (contact media5 sales)
K - 2FXS-LP card (contact media5 sales)
L - 4FXS-LP card
M - 2FXS-LP bypass card (contact media5 sales)
N - 4FXS-LP bypass card (contact media5 sales)

7

Slot 7 for internal Mini-DSP

0 - No card
D - internal single DSP card
E - internal dual DSP card

8

Reserved

Always 0

Top

Product Disposal Instructions

This symbol indicates that the product is classified as electrical or electronic equipment and should not be disposed of along with 
commercial or household waste at the end of its working life. For appropriate disposal and recycling instructions, contact your local 
Media5 Corporation provider.

The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) was established by the European Union to minimize negative impact on 
the environment, control hazardous substances, and curtail landfill expansion by using the best available recovery and recycling techniques.

Top

DGW Documentation

Mediatrix devices are supplied with an exhaustive set of documentation.

Mediatrix user documentation is available on the 

.

Media5 Documentation Portal

Several types of documents were created to clearly present the information you are looking for. Our documentation includes:

Release notes: Generated at each GA release, this document includes the known and solved issues of the software. It also outlines the changes 
and the new features the release includes.
Configuration notes: These documents are created to facilitate the configuration of a specific use case. They address a configuration aspect we 
consider that most users will need to perform. However, in some cases, a configuration note is created after receiving a question from a 
customer. They provide standard step-by-step procedures detailing the values of the parameters to use. They provide a means of validation and 
present some conceptual information. The configuration notes are specifically created to guide the user through an aspect of the configuration.
Technical bulletins: These documents are created to facilitate the configuration of a specific technical action, such as performing a firmware 
upgrade.
Hardware installation guide: They provide the detailed procedure on how to safely and adequately install the unit. It provides information on 
card installation, cable connections, and how to access for the first time the Management interface.
User guide: The user guide explains how to customise to your needs the configuration of the unit. Although this document is task oriented, it 
provides conceptual information to help the user understand the purpose and impact of each task. The User Guide will provide information such 
as where and how TR-069 can be configured in the Management Interface, how to set firewalls, or how to use the CLI to configure parameters 
that are not available in the Management Interface.
Reference guide: This exhaustive document has been created for advanced users. It includes a description of all the parameters used by all the 
services of the Mediatrix units. You will find, for example, scripts to configure a specific parameter, notification messages sent by a service, or an 
action description used to create Rulesets. This document includes reference information such as a dictionary, and it does not include any step-
by-step procedures.

Top

Copyright Notice

Copyright © 2022 Media5 Corporation.

This document contains information that is proprietary to Media5 Corporation.

Media5 Corporation reserves all rights to this document as well as to the Intellectual Property of the document and the technology and know-how that it 
includes and represents.

This publication cannot be reproduced, neither in whole nor in part, in any form whatsoever, without written prior approval by Media5 Corporation.

Media5 Corporation reserves the right to revise this publication and make changes at any time and without the obligation to notify any person and/or entity 
of such revisions and/or changes.

Содержание M



















Отзывы: