5
EN
Two ways to start the car recorder:
When used with built-in battery
Press “ON/OFF” button once to power on the device,
press again to power off .
Charging: connect DVR recorder to PC computer using
USB cable. Green and red LED indicator will be on, when
fully charged red LED is off .
When connected to car charger
Device will automatically detect power from car lighter
socket and device will turn on. Start engine, device will
start record automatically. Stop engine, device will save
fi le and turn off after few seconds automatically.
Charging: when connected to car charger red LED indica-
tor will be on, when fully charged red LED is off . During re-
cording red LED will be on and green LED will be blinking.
Recording
DVR will enter into default recording mode when
turned on, green LED will be blinking during record.
The recorded fi le is saved onto SD/SDHC card. Stop re-
cording by pressing “REC/SNAP” button or simply stop
engine when device is connected via car charger, green
LED will go off .
Note! When option “Motion detection” is enabled
fi les are recorded in cycle. If there is no free space
on SD card device is deleting previous fi les in order
to record new fi le.
Video mode settings
Power on the device, press “MENU” button to enter set-
tings mode. Press “UP” or “DOWN” button to navigate,
then press “REC/SNAP” to enter submenu.
¯
Image Size: [HD 1280x720/640x390]
¯
Time Stamp: [On/Off ]
¯
Motion detect: [On/Off ]
Note! When motion detection is set enabled, record
will automatically start whenever movement is de-
tected within defi ned “record time”.
¯
Audio record: [On/Off ]
¯
Record time (adjust max fi le length): [2 min/5 min
/15 min] (longer records will be split into volumes)
¯
Night mode: [disable/auto]
¯
Setup
- Format: select OK to format SD card
- Language: select menu language
- Default settings: select OK to set default settings
- Frequency: select 50Hz or 60Hz
- Date: enter current date/time.