media-tech marathon bt MT3572, Руководство пользователя

Страница: 4 / 32

4
EN
shortly blink every 5 seconds and device will
sound message to confirm successful pairing.
Answer call – when you receive an incoming
call, you will hear ringing in the headset, press
answer/end button once.
End call - during conversation press answer/
end button once.
Reject call – when you receive an incoming
call press and hold answer/end button for at
least 1 seconds to reject a call.
Redial last number – when in standby mode,
press shortly twice answer/end button to re-
dial last number.
Volume Up – during voice call or music play
press once to increase volume, when the high-
est level is reached you will hear two beeps.
Volume Down – during voice or music play
call press once to decrease volume.
Power ON – to power ON press and hold an-
swer/end button for 2 seconds until LED indi-
cator starts to flash blue. If device can not find
previously paired device it will flash red and
blue LED alternatively. If device is connected
with paired device it will sound message and
blue LED will blink every 5 seconds.
Power OFF – to power OFF press and hold
answer/end button for about 5 seconds until
red LED will blink and go off. Device will sound
message to confirm.
Pairing the device – power on the device by
holding answer/end button for 2 seconds until
blue and red LED will flash alternatively. Now
perform searching for new Bluetooth devices
in your mobile phone (some mobile phones
require enabling “visibility for unpaired Blue-
tooth devices”), when prompted enter pass-
code 0000. You only need to pair device once.
If pairing is successful, blue LED indicator will