4
© 11.2016
1 General Information
The personnel entrusted with installation, operation or maintenance of the safety relief valve must
have completely read and understood beforehand the following documents:
•
Safety Relief Valve SL 10 Product Information
The product information contains technical data, dimensions and a description of the design and the mode of
operation.
•
Safety Relief Valve SL 10 Operating and Maintenance Instructions
This document allows safe and efficient handling of the device and contains information on assembly,
commissioning, maintenance, troubleshooting, and repair according to regulations.
It is an integral part of the scope of delivery of the device, must be kept in close proximity of the device and
must be readily accessible to personnel at any time.
The basic requirement of safe operation is compliance with all safety instructions and guidelines specified in
these instructions. Accordingly, the information and instructions must be observed when working on the device
or on the gas line. In addition, the local occupational safety regulations and the general safety regulations for
the application range of the device shall apply.
The figures in these instructions are provided for basic understanding and may differ from the actual design.
The contents in these instructions are protected by copyright. They may be used as part of operating the
device. Any other use and / or reproduction is not permitted without prior authorization by the MEDENUS Gas-
Druckregeltechnik GmbH.
1.1 Warranty and Liability
Claims under warranty or liability for personal injury and material damage are generally void,
if one or several of the following conditions are not observed:
•
Work on the device during the warranty period may only be performed in consultation with the manufacturer
•
Designated use of the device in accordance with the established conditions of use
•
Proper installation, commissioning, operation and maintenance of the device
•
Operation of the device with properly installed and functioning safety devices only
•
Operating and maintenance instructions of the device or of the system
•
Observance of the maintenance instructions
•
Properly performed repairs
•
Supply lines without defects
•
The use of original MEDENUS
©
spare parts and lubricants listed in these instructions or
•
Force majeure
It is generally prohibited
•
to perform constructive modifications on the device
•
to keep using the device despite the detection of a defect
