User guide P9-0158-B
37 of 60
Version 3.0.3 - 2016
Medema A/S
For transport in an estate car, the
Mini Crosser must be secured with
belts to the floor of the car
Eye for restraints
The Mini Crosser can be used as a seat during transport in
a van or bus, provided it is securely anchored to the vehicle
with approved four-point belts attached to the restraint points
provided on the Mini Crosser.
The Mini Crosser’s restraint points have been tested and
approved in accordance with ISO 7176-19.
The user must also always be independently restrained in the
actual motor vehicle in accordance with traffic legislation rules.
Example
Restraining the
passenger with a static
3-point seat belt:
Secure to the rearmost
retractors.
The shoulder belt must rest
against the collar bone and
fall diagonally to the hip,
where it is secured.
Tighten the belt by pulling on the loose strap. Undo it again by
lifting the buckle. This is the same as on an aircraft.
Retractor
with belt
Male and
female parts
of belt done
up
