This function is used to turn on or turn off the prompt tone. The default
setting is turn on.
Operation:
Press and hold the [SHIFT] button, then press the key marked BEEP
key to turn the beep tone on or off.
What’s MIDI?
MIDI (short for Musical Instrument Digital Interface) allows a wide
variety of electronic musical instruments, computers and other related
devices to connect and communicate with one another. MIDI carries
event messages that specify notation, pitch and velocity, control signals
for parameters such as volume, vibrato, audio panning, and program
change information to change the voice selections.
MIDI Terminals
This instrument has been equipped with 2 MIDI terminals: 1 USB
terminal and 1 MIDI OUT terminal.
Terminal Rules
In MIDI terminals, we define those devices which control other devices
as “master device”, and the other controlled devices as “subordinate
device”. Connect the MIDI OUT terminal of master device to the MIDI
IN terminal of subordinate device. The MIDI terminals of the same
device cannot be connected. Similarly the same MIDI terminals of
different Devices cannot be connected.
MIDI OUT
Connect the instrument MIDI OUT terminal through a standard MIDI
cable to a computer or MIDI IN jack of other external audio source. So
the MIDI data can be transmitted from the MIDI out to another MIDI
device when you play the keyboard or use the MIDI control function.
such as: note on/off, voice change, control data and so on. Please refer
to MIDI Implementation Chart for details.
MIDI Controller
This instrument has 3 independent MIDI controllers, which can be used
to control the MIDI device. Please refer to the detailed procedures as
below.
Controller Settings
1.
Enter MIDI controller mode
Press and hold [SHIFT] button, then press the [MIDI MODE] button
to enter the MIDI controller mode. The LED indicator of
[MIDI MODE] lights up.
Beep Tone
22
MIDI Function
BEEP
C
M
Y
CM
MY
CY
CMY
K
aw_SP3000_Manual_G04_150723.ai 22 2015/7/23 11:20:11
aw_SP3000_Manual_G04_150723.ai 22 2015/7/23 11:20:11
