The TWINOVA mode splits the keyboard into two independent areas,
both have the same pitch and voice, for the convenience of one-to-one
teaching.
Turn the twinova on/off
1.
Press the [TWINOVA] button to turn on the function. The display
shows “on”. The default split point is E3 (32).
2.
Press the button again to turn off the function.
Note:
In TWINOVA mode, both the dual and lower function is automatically
disabled.
Select a voice
The default voice of right hand and left hand is the upper voice you
have selected before entering the TWINOVA mode. You can press one
of the VOICE select buttons or the [+/YES]/[-/NO] button to select a
desired voice.
Set the split point
In TWINOVA mode, press and hold the [LOWER] button, then tap a key
between C3 and C6 to set the split point to that key. It will exit the
setting menu when you release the [LOWER] button.
Set the octave
This function will raise or lower the pitch of the entire keyboard by an
octave. The octave is adjustable only when TWINOVA is engaged.
When Twinova is disabled, the keyboard will return to normal pitch level
and the octave will become unavailable.
Press and hold [SHIFT], then use the keys marked [/-] to set
the octave value. The display shows the current octave value, such as
“0”.
Note
：
TWINOVA is unavailable in song mode or demo mode.
When the beep tone is in use, you can hear a prompt sound whenever
you change the settings. The default setting is on.
Press and hold [SHIFT], then press the key marked [BEEP] to turn the
tone on or off.
Twinova
23
Beep Tone
Default Split Point
：
E3
（
32
）
C
M
Y
CM
MY
CY
CMY
K
aw_DP420K_Manual_G03_151028.ai 23 2015/10/28 17:25:28
aw_DP420K_Manual_G03_151028.ai 23 2015/10/28 17:25:28
