Song Recording
Start Recording
Stop Recording
1.
When recording is in process, holding down [SHIFT] button and
then press the [RECORD] button to stop recording.
2.
When recording is in process, if the memory is full, the recording will
stop and save automatically, and the LCD displays “Rec_Full”.
3.
If you choose the accomp recording, the recording will stop
automatically when the ending of the rhythm finishes.
RecSong1
StGrdPno
Rec_Full
30
Before you start recording, you need to select a user song to keep the
recording song, and set the recording tracks.
1.
Holding down [SHIFT] button, and then press the [RECORD] button
to enter user song selection mode. The LCD displays "RecSong1”
and sequence number.
Use the data dial, [+/YES] or [-/NO] button select the user song you
want to record.
2.
Holding down [SHIFT] button, and then press the [RECORD] button
again to enter record preparation mode. LCD lightens the “REC”
flag, and LCD will flash beat indicate. The piano will automatically
select a empty track to record your performance.
The LCD indicate in the left which flashes shows the record track.
3.
In the recording preparation status, you can adjust parameters such
as the voice, style and tempo. When recording a new song, it will
automatically select “Melody 1” as the recorded track.
Holding down [SHIFT] button, and then press “ACCOMP” (or
“MELODY1” to “MELODY 5”) to make your own selection.
The ACCOMP track and one of MELODY track can be recorded
at the same time, but it cannot record two MOLODY track
simultaneously.
4.
Press [START/STOP] button or play the keyboard to start recording.
When choosing the accomp tack and A.B.C. is open, play an
effective chords in left hand section or press [START/STOP] button
would start recording.
Note:
Style can only be recorded in “Accomp” track.The recording track LCD
indicate has three states: Blinking,Light, Go out.
Blinking:
It means the track was chose for recording. If the track have
recorded data, the original data will be replaced.
Light:
It means this track have data, the recording process will record
data with playback the recorded track at the same time.
Go out:
It means this track has no data or has data which can not
playback when recording.
When recording an existing song, the keyboard will automatically
select the empty track next to the occupied track. For example, if
“Melody 1” is occupied, then “Melody 2” will be selected as the record
track. When all 6 tracks have been recorded and a specific track needs
to be revised, press the button of that track and start recording. The
original data will be replaced.
ACCOMP
MELODY 1
MELODY 2
MELODY 3
MELODY 4
MELODY 5
0
5
25
75
95
100
AW_DP388_Manual_G15_150405
2015
4
4
16:52:44