Medeli Dd635d, Руководство пользователя

Страница: 24 / 38

MIDI Setup
1.
Press the [KIT] button, then press the [MENU] button.
2.
Press the [
∧
]/[
∨
] buttons or [F1]/[F2] buttons to select “Midi
Setup”, then press [F3 (ENTER)] to enter MIDI SETUP menu.
3.
Press the [
∧
]/[
∨
] buttons or [F1]/[F2] buttons to select a parameter
to edit, then use the data dial or [<]/[>] buttons to change the
setting. After editing, press [F3 (ENTER)] to save, otherwise, the
edited data will be lost after power off.
MIDI Setup parameters and their range:
Auto Power Off
This function will automatically turn off the power after a period of time
when the module is not in use.
Note: This function is not available during song playback, during
recording or when MIDI IN jack is receiving data.
1.
Press the [KIT] button, then press the [MENU] button.
2.
Press the [
∧
]/[
∨
] buttons or [F1]/[F2] buttons to select “Option”,
then press [F3 (ENTER)] to enter OPTION menu.
3.
Press the [
∧
]/[
∨
] buttons or [F1]/[F2] buttons to select a parameter
to edit, then use the data dial or [<]/[>] buttons to change the
setting. After editing, press [F3 (ENTER)] to save, otherwise, the
edited data will be lost after power off.
Option parameters and their range:
Settings
24
Parameter
Soft Through
Local Control
GM Mode
Prog Change RX
Prog Change TX
Range
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
Description
Message received from MIDI IN will be transmit-
ted to MIDI OUT.
ON: Performance MIDI events from pads will be
transmitted to the module and MIDI OUT.
OFF: Performance MIDI events from pads will be
transmitted to MIDI OUT only.
ON: MIDI channel 10 will respond GM drum kit.
OFF: MIDI channel 10 will respond local drum kit.
ON: MIDI channel 10 will respond the program
change MIDI message.
OFF: MIDI channel 10 will ignore the program
change MIDI message.
ON: Send program change MIDI message from
MIDI channel 10 when changing the local drum
kit number.
OFF: Do not send program change MIDI
message from channel 10 when changing the
local drum kit number.
Parameter
Auto Power Off
Display Contrast
Range
OFF,
30, 60
1~16
Description
OFF: Auto power off is disabled.
30, 60: The module will shut down after 30 min or
60 min when it is not used.
Adjust the contrast ratio of display.
KIT
MENU
KIT
MENU
F1 F2
F1 F2
C
M
Y
CM
MY
CY
CMY
K
AW_DD635D_manual_G01_181015.pdf 24 18/10/15 17:29