6
Getting Ready to Play
Setting up the Power Supply
You can power the digital drum either by using the power
adaptor or by batteries.
Using power adaptor
1.
Connect the adaptor to the DC jack on the rear panel.
2.
Connect the other end of the power cord to an
appropriate AC outlet.
Notes:
1.
Please use the specified AC adaptor.
2.
Even when the digital drum is turned off, electricity is
still flowing to it at minimum level. Please unplug the
digital drum when it is not in use for a long time.
Using batteries
The digital drum requires 6 pieces of “C" size, R14,
SUM-2 or equivalent batteries for power supply.
1.
Open the battery compartment cover located on the
bottom of the module.
2.
Insert the batteries. Follow carefully the polarity
markings on the cabinet.
3.
Replace the compartment cover. Make sure it locks
firmly in place.
Notes:
1.
Do not mix using the used and new batteries.
2.
Always use the same types of batteries.
3.
Remove the batteries when the digital drum is not
being used for a long period of time.
Turning the power on
Set the POWER switch to ON, the LCD will be lit,
indicating the digital drum is turned on.
Turning the power off
Set the POWER switch to OFF, the LCD becomes unlit,
indicating the digital drum is turned off.
Auto Power Off Function
In order to save energy, this digital drum will automatically
shut down after 30 minutes if it is not in use.
To disable this function, hold down [START/STOP] button,
then turn on the power.
C
M
Y
CM
MY
CY
CMY
K
AW_DD61_manual_G02_180410.pdf 6 18/4/10 11:14
