Medeli DD6, Руководство пользователя

Страница: 4 / 13

Mounting the digital drum on the stand
1.First, open the tripod so the legs are spaced at least 30cm apart.
2. Attach the wing screw and washer in the order shown
in the figure.
3.Attach the pad
Turn the pad until the screw is just about all the way in;
then adjust the angle of the pad and tighten the wing screw
from side the stand.
Do not forcefully try to turn the pad after the screw is already all
the way in. doing so may damage the stand's screw
4.Mounting the digital drum on the tripod.
Precautions When Folding the Tripod
when folding the digital drum tripod legs to store the unit,
be cautious not to get your
fingers pinched while handling the stand.
30
cm
Stand setup
Cymbal Setup
6
Setup cymbal on the tripod.
Using an optional cymbal cable you can
connect cymbal pads to the HI-HAT in jack.
Using an optional kick cable of kick you can
connect KICK pads to the KICK in jack.
KICK
HI-HAT
CONTROL KICK HI-HAT PHONES
Take out washer
Attach wing screw
and washer
in the order
Loosen wing screw
Tighten the knob
Wing screw
7
HI-HAT
CONTROL KICK HI-HAT PHONES
Cymbal