1
2
3
Loosen the wing screw on the clamp
si d e arm (L 1)
Insert the drum module to the clamp
Tighten the wing screw on the clamp
Insert th e drum module
Tig hten the wing screw
Loosen the wing screw
Loosen L-rod wing nuts on tom clamps.
Insert textured plastic end of L-rod into tom clamp and tighten wing nuts.
Repeat for each tom clamp.
Loosen wing nut on pad.
Attach pads to L-rods and tighten wing nuts. Repeat for each pad.
1
2
3
4
Attaching pads to rack
Attaching module
Attaching cymba ls
Ba ss drum and Hi-Ha t pedal
1
2
3
Place the bass drum pad on the floor in the center of rack.
Attach your bass drum pedal to the bass drum pad.
Place the Hi-Hat pedal on the floor on your left side.
Please connect the clearly marked cables from the pads to the correct inputs on the drum module, and you are ready to play!
1
2
3
1
Insert each boom cymbal arm into pillar(L1) and pillar(R1).
Insert cymbal holder(short) on the left side-arm cymbal clamp.
Insert cymbal holder(long) on the right side-arm cymbal clamp.
Remove wing nut and felt washer from cymbal tilter.
Place cymbal pad on tilter assembly.
Re-attach the felt washer and wing nut. Tighten w ing nut.
Note: Cymbals are arranged as follows: 12" Hi-Hat on left-side
short arm, 12" crash on left-side boom arm, 14" ride on right-side
boom arm, 12" crash on right-side long arm.
1
2
3
4
5
W ing N ut
Fe lt Was her
W ing N u t
Felt Washe r
Version:G 03
14" Cymbal Pad
12" Cymbal Pads
12" Cymbal Pads
12" Cymbal Pads
9" Tom Pads
Hi-Hat Control
Pedal
Kick pad
Drum module
12"
12"
12"
14"
11" Drum Pad
11" Drum Pad
P D F
文
件
使
用
" p d f F a c t o r y "
试
用
版
本
创
建
www.fineprint.cn
