Connections
9
Power Jack
Power Supply
1. Make sure that the piano is turned off. Before you switch the
piano on or off , turn down the volume of piano and any
connected audio equipments first.
2. Connect the AC adaptor to the power supply jack of this piano.
3. Plug the AC adaptor into an AC outlet.
4. Press the [POWER] button, the LCD will display “LOADING...”,
Which indicates the piano is powered on.
5. If you are ready to turn off the piano, press the [POWER] button
again.
Notes:
1. The piano will automatically shut down in about 30 minutes if it is
not used.
2. When the keyboard is not in use or during thunderstorm, please
disconnect the power for safety purpose
Connecting a pair of Headphones
A standard pair of stereo headphones can be plugged in here for
private practice or late-night playing.
Phones1: when a pair of headphones is plugged into the jack 1, the
internal stereo speaker system is automatically shut off.
The sound can only be heard from headphones.
Phones2: when a pair of headphones is plugged into the jack 2, the
sound can be heard from both headphones and speakers
of the instrument.
Note:
To avoid the risk of hearing loss, do not listen with headphones at
high volume level for a long period of time.
Connecting an Audio Equipment
The rear-panel AUX.OUT jack delivers the output of the instrument
to a keyboard amplifier, a mixing console, or tape recorder. Use an
audio cord to connect the AUX OUT jack on the rear panel to the
AUX IN jack of the amplifier.
Note:
To avoid damaging the speakers, set the volume level to minimum
before connecting the power and other devices.
Connecting an MP3/CD Player
Connect the audio output of an MP3/CD player or other audio
source to the stereo AUX.IN jack on the rear panel.
The input signal is mixed with the piano signal, allowing you
to play along.
C
M
Y
CM
MY
CY
CMY
K
Aw_CDP6200_Manual_G11_150512.ai 9 2015/5/12 19:35:06
Aw_CDP6200_Manual_G11_150512.ai 9 2015/5/12 19:35:06
