Setup
7
A.
Install the piano legs as shown below.
First, insert the four Turned Nuts into the holes at the back of the
Pedal Panel.
Second, align both the left and the right legs to each side of the
Pedal Panel.
Third, insert the a screws M6x50 through the screw holes and fit
them into the Turned Nuts.
Finally, tighten with a screwdriver and place the plastic caps on top.
(Check the components in the right direction before installing.)
B.
As shown below, Place the piano body on the stand, fix it with two
hand screws.
Turned nut (4PCS)
Phillip s head screws M6x50 (4PCS)
Plastic screw cap (4PCS)
Plastic screw cap (4PCS)
Phillips head screws M6x50 (4PCS)
Gasket (2PCS)
Screw M4x15 (2PCS)
Sound box cables
C.
Install the Sound Boxes as shown below.
First, place the sound boxes as shown.
Second, insert the screws M6x50 through holes on the legs and
fit them into the sound box. Tighten with a screwdriver and
place the plastic caps on top.
Third, insert the screws M4x15 through the sound boxes and fit
them into the holes at the bottom of The Piano. Tighten with a
screwdriver.
Finally, insert the sound box cables into the socket at the
bottom of the Piano body.