2
1
3
4
5
1.1 Before using for the first time
Clean and sanitize the parts below before
using your pump for the first time. Follow
the cleaning and sanitizing instructions in
Sections 1.2 (start at step 4) and 1.3
that follow.
1. Cleaning
1.2 after each use
Clean all parts that come in contact
with your breast and breastmilk.
See image in
Section 1.1.
Twist and pull the yellow valves
off the breastshield connectors.
Separate breastshields from
breastshield connectors.
Remove the white membranes
from the yellow valves.
• Only use drinking-quality tap or bottled
water for cleaning.
• Take apart and wash all parts that
come in contact with the breast and
breastmilk immediately after use to
avoid dry up of milk residues and to
prevent growth of bacteria.
Caution
Rinse in cool water all separated
parts that came in contact with
breast and breastmilk in order to
remove breastmilk residue.
Washing in sink:
Washing options:
or
Washing in dishwasher:
• Soak all separated parts in warm soapy
water for 5 minutes.
• Clean with a clean dish-cloth or soft
brush.
• Rinse all separated parts with clear
water.
• Allow all parts to air dry in a clean area.
• Store dry parts when not in use.
• Wash all separated parts on top rack of
dishwasher.
• Allow all breastpump parts to air dry in
a clean area.
• Store dry parts when not in use.
Questions?
Visit
www.medela.com
or call us at
1-800-435-8316.
9
8
• Breastshield
• Breastshield
connector
• White membrane
• Yellow valve
• Breastmilk bottles
and lids
Supplies Needed:
•
Mild Dish Soap
• Clean Dish Towel or
Soft Brush
• Clean Sink or Bowl
• Drinking Quality
Water
