θ
TV OUTPUT SETTINGS
Connect the Mede8er to your TV by one of the connection options as shown on page 4 & 5 and change the
input option on your TV to match the option you selected. If you do not get to see the Mede8er GUI on your
TV you will need to toggle the Mede8er TV output until you get a picture
.
TV SYS Toggle Procedure
The Mede8er has three video output options ie Composite Video (yellow RCA
connectors, Component Video (Red - Green- Blue connectors) and HDMI. Each
output option also offers different screen resolution settings and these will need
to be adjusted to match the type of TV used.
To change the Video Output on the Mede8er just
press the TV SYS button on the remote and it will
change the Video Output to the next available
output option. If after pressing the TV SYS
button you still do not get a picture then
after a short pause press the TV SYS
again until you see the Mede8er GUI on
your TV. Keep repeating this procedure
until you see a picture on your TV.
AUDIO SETTINGS
Surround Sound
Select “Don’t Care” if you are using 2 CH stereo. If you are using SPDIF or Co-Axial Digital then
select “AC3". If you are using HDMI Audio to amplifier then select “True HD”
HDMI Downmix (2 channel)
Use this setting if you are connecting the Mede8er directly to the HDMI input on your TV. The
sound will be downmixed to 2 channel stereo.
HDMI Passthrough
Use this setting if you are connecting to the HDMI input of a Home Theatre Amplifier. The audio will be
passed through as Bitstream or PCM and the amplifier will do the multichannel decoding.
HDMI LPCM MULTI CH
Use this setting for content that has a 6 channel AAC soundtrack.
SPDIF Downmix (2 channel)
Use this setting to connect to a Amplifier via Toslink optical cable or Co-Axial Digital RCA cable.
The sound will be downmixed to 2 channel stereo.
SPDIF Passthrough
Use this setting to connect to amplifier via Toslink optical cable or Co-Axial Digital RCA cable.
The sound will be passed through as Bitstream or LPCM and the amplifier will do the
multichannel decoding.
FORCE DECODE AAC/MP3
Use this setting if you do not get AAC/MP3 Audio in HDMI ‘Auto’ or Passthrough.
Once you see the Mede8er GUI on your TV then you must enter the Video Setup
mode and adjust the Video settings to match the screen size resolution of your
TV.
Page6
