MED Associates ANL-930, Руководство пользователя

Страница: 5 / 9

MED ASSOCIATES INC. ANL-930 SPL MEASUREMENT PKG
CHAPTER 2 | POWER
The ANL-930 can be operated via the included 6V DC Power Adapter and/or the 18650 3.7v
lithium-ion Rechargeable battery. The ANL-930 can be used via the 6V DC Power Adapter while
simultaneously charging the 18650 3.7v lithium-ion Rechargeable battery, using pass-through
technology.
Installing/Replacing the Battery
The ENV-421 battery is designed to last the lifetime of the unit, but is replaceable if needed.
Battery type 18650 3.7v lithium-ion is required when replacing the rechargeable battery.
Figure 2.1 – Battery Compartment (Internal View)
- Ensure the unit is powered off and not plugged into a AC wall outlet.
- Remove 2 screws from the bottom of the ANL-930.
- Turn the device back over so that it is standing on its feet or normal orientation.
- Remove the top cover only, to reveal the battery compartment.
- Take care to ensure battery is installed with proper orientation. The battery
compartment has + and – marked. If those are too hard to see, put the positive side
with the red wire and the negative with the black wire. Reassemble unit.
- Discard old batteries in accordance with your local solid waste authority rules.
- 2 -
DOC-315 Rev 1.0 Copyright © 2019
Med Associates, Inc.