mectron MICROPIEZO, Руководство по эксплуатации и обслуживанию

Страница: 163 / 262

69
TECHNICAL DATA
11.2.4 Specifications of the Tests for the Immunity of the Accessible
Parts of the Casing to the Wireless RF Communications Device
MICROPIEZO is designed to operate in an electromagnetic environment in which radiated
RF disturbances are under control. The client or operator of MICROPIEZO can help prevent
electromagnetic interferences by guaranteeing a minimum distance between the mobile and
portable RF communication devices (transmitters) and MICROPIEZO, as recommended below, in
relation to the maximum output power of the radio communication devices.
Test
Freq.
(MHz)
Band
a)
(MHz)
Service
a)
Modulation
b)
Max
power
(W)
Distance
(m)
Immunity
test value
(V/m)
385 380 - 390 TETRA 400
Pulse
modulation
b)
18 Hz
1.8 0.3 27
450 430 - 470
GMRS 460
FRS 460
FM
c)
± 5 kHz
deviation
1 kHz sine
2 0.3 28
710
704 - 787
LTE band 13,
17
Pulse
modulation
b)
217 Hz
0.2 0.3 9 745
780
810
800 - 960
GSM 800/900
TETRA 800
iDEN 820
CDMA 850
Band LTE 5
Pulse
modulation
b)
18 Hz
2 0.3 28
870
930
1720
1700 - 1990
GSM 1800
CDMA 1900
GSM 1900
DECT
LTE Band 1, 3,
4, 25
UMTS
Pulse
modulation
b)
217 Hz
2 0.3 28
1845
1970
2450 2400 - 2750
Bluetooth
WLAN
802.11 b/g/n
RFID 2450
Band LTE 7
Pulse
modulation
b)
217 Hz
2 0.3 28
5420
5100 - 5800
WLAN
802.11 a/n
Pulse
modulation
b)
217 Hz
0.2 0.3 9 5500
5785
a) For some services, only uplink frequencies are
included.
b) The carrier must be modulated using a square wave
signal with a duty cycle of 50%.
c) As an alternative to FM modulation, 18 Hz pulse
modulation at 50% can be used because, although it
does not represent true modulation, it represents the
worst case.