MecPower Tecway Crazy Crab, Руководство по эксплуатации, Страница: 17 / 33

16
六、
Adjustment
9.1 Coin Acceptor Adjustment
Coin acceptor adjustment mode
：
1) Please remove the plastic coin in the sample slot and replace it with the token to be used as the
sample currency.
2) Loosen the screw on the back of the coin slot, and adjust the fixed piece on the back of the coin
slot according to the diameter of the token used, so as to prevent the coin with too large diameter
from being stuck in the coin slot by mistake.
3) Turn the coin normal switch to the no position. Note: the switch can be used as a coin switch
when it is turned on.
4) Adjust the coin signal wavelength adjustment switch to 50ms.
5) Adjust the tolerance of token and fine adjust the resistance according to the figure. If the
sensitivity of adjusting the tolerance of token in clockwise direction is increased, the range of
accepting the tolerance of token will be larger; if the sensitivity of adjusting the tolerance of token
in counterclockwise direction is reduced, the range of accepting the tolerance of coin will be
smaller, that is to say, the selection will be stricter.