BA / RE 250 / EN / V17-11
www.mecon.de
Page 5 / 32
Safety Instructions
1.2 Certifications
CE marking
The manufacturer certifies for the device RE 250 meets all statutory requirements of the
following EC directives by applying the CE marking:
•
Pressure equipment directive 2014/68/EU
•
Low voltage directive 2014/35/EU *
•
EMC-directive 2014/30/EU
•
NAMUR recommandation NE21 *
•
ATEX directive 94/9/EC **
(*Devices with electrical installations)
(**Devices for use in hazardous areas)
1.3 Safety instructions from the manufacturer
Disclaimer
The manufacturer will not be liable for any damage resulting from the use of its product, including,
but not limited to direct, indirect, incidental, punitive and consequential damages.
Any product purchased from the manufacturer is warranted in accordance with the relevant product
documentation and our Terms and Conditions of Sale.
The manufacturer reserves the right to revise the content of its documents, including this disclaimer,
without prior notification, and will not be liable in any way for possible consequences of such changes.
Product liability and warranty
MECON GmbH assumes no guarantee for repair work carried out by the customer without prior
notification and consultation. Any instruments or parts rejected by a customer must be returned to
us, if no other arrangement has been made.
General information
This manual is intended for the correct installation as well as operation and maintenance of the
devices. Read the instructions carefully before installing the device and placing it into operation.
Specially designed or customized models and specialized applications are not included in this
manual.
