Mecon mag-flux F5, Быстрый старт

Страница: 4 / 4

Mecon GmbH Phone +49(0)2237 600 06 - 0 Fax +49(0)2237 600 06 - 40 page 4 to 4
Röntgenstraße 105 www.mecon.de info@mecon.de Mecon 01/2007
D-50169 Kerpen
Electromagnetic flow Sensor
mag-flux F5
__ Technical Data
Application field see page 1
Measuring principle pulsed constant field (DC)
pulsed alternating field (AC)
Inlet
Nominal diameter metering tube Measuring range
Constant field Alternating field
2 mm (0,078”) 5 - 110 l/h 3 - 110 l/h
4 mm (0,156”) 25 - 450 l/h 15 - 450 l/h
8 mm (0,312”) 100 - 1800 l/h 60 - 1800 l/h
12 mm (0,47”) 200 - 4000 l/h 120 - 4000 l/h
Measuring accuracy
Error of measurement ± 0,5 % of measured value
0,25 m/s to 10 m/s
Repeat accuracy ± 0,15 % of measured value
0,25 m/s to 10 m/s
Operational conditions
Mounting position vertical or horizontal
Max. operating temperature 150°C / 302°F
Pressure limits 25 bar/ 362,5 psi
higher upon request
Temperature Max. pressure
°C °F Bar Psi
0 - 50 32 -122 10 145
60 140 8,5 123
70 158 7,5 109
80 176 6,5 94
90 194 5,5 80
100 212 4,5 65
110 230 3,8 55
Pressure/temperature limits with
PVDF connections (DIN 8062)
120 248 3,0 44
Protection class
IP 67/IP 68
Minimum conductivity
· with constant field
·
with alternating field
> 10
μ S/cm
> 0,1 μ S/cm
Specifications
Design Fully-welded steel fitting with cover
made of aluminium
Weight approx. 3 kg
Cable inlet
· with constant field
· with alternating field
2 x M 16 x 1,5 / 2 x ½” NPT
3 x M 16 x 1,5 / 3 x ½” NPT
Material
· Metering tube
· Sensor housing
· Process connection
Zirconium oxide
Steel
Stainless Steel, Hastelloy, PVDF
Electrodes
· Material
· Design
Platinum 99,9%, sintered
Flat electrode
__ Ordering data
Electromagnetic flow Sensor
mag-flux F5
MAG 5 6 1 - 0 0 - 0
Measuring principle
• alternating field 3
• constant field 4
Nominal diameter of metering tube
• 2 mm D
• 4 mm E
• 8 mm F
• 12 mm G
Process connection
• G 1/2, mat.No. 1.4571 A
• G 1/2, HC4 (mat.No. 2.4610) B
• G 1/2, PVDF with HC4- earthing rings (mat..No. 2.4610) C
• G 1/2, Titanium S
• NPT 1/2", mat.No. 1.4571 D
• NPT 1/2", HC4 (mat.No. 2.4610) E
• NPT 1/2", PVDF with HC4- earthing rings (mat.No. 2.4610) F
• DN 15 PN 25 DIN 2501, mat.No. 1.4571 H
• DN 15 PN 25 DIN 2501, HC4 (mat.No. 2.4610) J
• DN 15 PN 25 DIN 2501, K
PVDF with HC4- earthing rings (mat.No. 2.4610)
• 1/2" Tri-Clamp, mat.No. 1.4571
L
• 1" Tri-Clamp, mat.No. 1.4571 N
• 1/2" ANSI B16.5 150 RF, mat.No. 1.4571 Q
• 1/2" ANSI B16.5 150 RF, T
PVDF with HC4- earthing rings (mat.No. 2.4610)
• other connections/ materials
Z
Gasket material
• EPDM 2
• Kalrez 3
Wall mount
• without 0
• with 1
Screwed gland
• M16 x 1,5 C
• NPT 1/2" B
Degree of protection
• IP 67 / NEMA 5 B
• IP 68 / NEMA 6 mit 5m firmly connected cable C
• IP 68 / NEMA 6 mit 10m firmly connected cable D
Further designs
• Measuring range < 10 l/h A11
• TAG plate inscription in english B11
• with 3-point calibration certificate B06
• with 6-point calibration certificate B07
• Silicone-free materials Y04
• TAG plate stainless steel Y17
WWW.TEESING.COM | +31 70 413 07 50