English
English
Ⅳ.
Brush Assembly/Disassembly
Assembly:
a. Select a brush or ironing plate as required.
b. First insert the flat ironing plate or brush button into the groove in the front of the
garment steamer body (as illustrated).
Disassembly:
Push the flat ironing plate or brush against the handle until it has been
pushed out.
Open the water tank cover and point the measuring cup at the water inlet to fill with water
The water level should not exceed the maximum capacity of the water tank. Cover the
water tank once full and then dry the tank surface. Never add water to the water tank
from the tap directly.
See the figure below:
Ⅴ.
Filling the water tank
Ⅵ.
Uses of Electric Garment Steamer Functions
- Instructions to Ironing Use
1. When the product is connected with the power supply, the indicator will flash for one
second and then will go out.
2. Startup/Shutdown: Press the switch button for 5sec to start up or shut down the
equipment.
3. Temperature Switching: This product has seven choices of temperature: 80/100/120/
140/160/180/200
℃ (
176
/
212
/
248
/
284
/
320
/
356
/
392°F), which can be switched on by
pressing the switch button shortly after the equipment is started.
4. Temperature Indicator: During preheating, the temperature indicator will be flashing
continuously and you can put the iron on its base for heating. Moreover, the
indicator
l
ight
w
ill
r
emain
o
n
s
teadily
w
hen
t
he
i
roning
b
oard
h
as
r
eached
t
he
s
et
t
emperature
v
alue.
O
nce
i
t
i
s
s
olidly
l
ighted
,
y
ou
c
an
b
egin
t
o
s
team
y
our
c
lothes.
5.When your iron is not in use, you can place it on its base. To add water to the water
tank, please place your iron vertically on its base. If tilted, the water may leak from the
cover edge when the water level is too high.
After use, please press the power switch for 5 seconds to turn off the
steam iron or
unplug its power supply. Pour out the water remaining in the water tank and store the
electric
i
ron properly until it has completely cooled down.
Disassemble
Assembl
-3-
-4-
