Meco 333, Руководство пользователя

Страница: 2 / 10

333 : 28-09-2012
8
7
6
5
1. mVAHz : Units
2. 04-204mA : Range of mA
3. % : Percentage
4. JKET : Thermocouple type
5. : Ramp
6. OPR : Operate, Output, Normal
7. OL : Overload, Output, Abnormal
8. STBY : Standby, Internal Calibration in Progress
9. SHIFT : Select SHIFT function
10. : Battery Low
1.
Press SHIFT button, and then press one of these buttons to
select desired mA range
2.
Press SHIFT button, then press this button to select desired mV
or V range
3.
Press SHIFT button, then press this button to select 0 C or 0 F
4.
Press SHIFT button, then press this button to select desired
type of thermocouple.
5.
Press SHIFT button, then press this button to perfarm
auto-ramp function. To stop the auto-ramp function, press this
button again
6.
Press this button to enter negative temperature. Or press
SHIFT button, then press this button first to enter percentage
in the mA, mV, and V functions.
7.
While the calibrator is in the SHIFT mode, and the percentage
is entered, press this
button to increment%.
8.
Always press this button to complete the entry of numbers.