Mecmesin Tornado, Руководство по эксплуатации

Страница: 15 / 52

page 14
The display shows OUT BAND and IN BAND. This menu
selects which values are to be considered.
OUT BAND Any value falling outside the set
limits LIMIT 1 and LIMIT 2.
IN BAND Any value falling between the set
limits LIMIT 1 and LIMIT 2.
Use the
UP
and
DOWN
keys to move the cursor and press
ENTER
key to select the desired feature.
The display shows PASS or FAIL. This menu sets the OUT
BAND criteria.
PASS Values, which fall either OUT BAND
(or IN BAND, if selected), are a PASS
and will cause an audible beep,
illuminate an LED or both.
FAIL Values, which fall either OUT BAND
(or IN BAND, if selected), are a FAIL
and will cause an audible beep,
illuminate an LED or both.
Use
UP
and
DOWN
keys to move the cursor and press
ENTER
key to select the desired feature.
The display shows BUZZER ON, CONTINUOUS and
PULSE. This menu selects the length of time that the buzzer
will sound, if AUDIBLE or BOTH has been selected in
sub-menu 5.
CONTINUOUS The buzzer sounds at a pre-set
alarm value and stays on until the
load falls below that pre-set.
PULSE The buzzer pulses for a fixed time
of one second every time the load
crosses over each of the presets.
Use the
UP
and
DOWN
keys to move the cursor and press
the
ENTER
key to select the desired feature.
The display will now return to the main menu page 1, press
ESC
to return the main display.
ALARM sub-menu 5
(ALARM BAND)
ALARM sub-menu 6
(ALARM PASS/FAIL)
ALARM sub-menu 7
(ALARM BUZZER MODE)